The Kemler code is the two- or three-digit code referred to in ADR as the hazard identification number and written on the upper half of the orange plate. Each digit indicates a hazard: 3 flammable liquid, 6 toxicity, 8 corrosivity and so on. Doubling a digit indicates an intensification of the hazard, and a leading X shows that the substance reacts dangerously with water.
Where does it appear on the orange plate?
The numbered orange plate is divided in two by a horizontal line. At the top is the hazard identification number, at the bottom the substance's four-digit UN number. Under ADR 5.3.2.2.1, the plate is 40 cm wide and 30 cm high; the digits are written in black, 100 mm high with a stroke width of 15 mm. The code for each substance is given in column 20 of ADR Table A; how to read the table is explained in the ADR Table A entry.
Numbered plates are seen most often on tankers, in bulk transport and on tank containers. Vehicles carrying packaged goods mostly have a blank orange plate at the front and rear. The general rules for the plate are in the orange plate entry.
What do the digits mean?
| Digit | Hazard indicated |
|---|---|
| 2 | Emission of gas due to pressure or chemical reaction |
| 3 | Flammability of liquids (vapours) and gases, or self-heating liquid |
| 4 | Flammability of solids, or self-heating solid |
| 5 | Oxidising (fire-intensifying) effect |
| 6 | Toxicity or risk of infection |
| 7 | Radioactivity |
| 8 | Corrosivity |
| 9 | Risk of spontaneous violent reaction |
The first digit gives the primary hazard, the following ones the subsidiary hazards. If the hazard is adequately indicated by a single digit, a 0 is added: diesel carries 30, a corrosive acid 80.
Doubled digits and the X prefix
Writing the same digit twice indicates an intensification of that hazard. 30 denotes a flammable liquid with a flash point between 23 and 60 °C, while 33 denotes a highly flammable liquid with a flash point below 23 °C. 88 means highly corrosive and 66 highly toxic. Some combinations have a special meaning in ADR: 22 means refrigerated liquefied asphyxiant gas, 333 pyrophoric liquid, 90 environmentally hazardous or miscellaneous dangerous substance, and 99 miscellaneous dangerous substance carried at an elevated temperature.
An X at the start of the code indicates that the substance reacts dangerously with water. For these substances, water may only be used with the approval of experts. For Class 1 explosives, a classification code such as 1.1D is written instead of digits.
Codes commonly seen in the field
| Code | UN No | Example substance | Meaning |
|---|---|---|---|
| 30 | 1202 | Diesel fuel | Flammable liquid |
| 33 | 1203 | Petrol (gasoline) | Highly flammable liquid |
| 23 | 1965 | LPG (hydrocarbon gas mixture) | Flammable gas |
| 268 | 1005 | Ammonia, anhydrous | Toxic, corrosive gas |
| 265 | 1017 | Chlorine | Toxic, oxidising gas |
| 225 | 1073 | Oxygen, refrigerated liquid | Refrigerated liquefied, oxidising gas |
| X423 | 1428 | Sodium | Solid that reacts dangerously with water, giving off flammable gases |
| 80 | 1830 | Sulphuric acid | Corrosive substance |
How is it used in an emergency response?
- Approach the vehicle with the wind at your back and from a safe distance; read the plate with binoculars or from afar.
- Report the upper and lower lines together to 112: the code gives the type of hazard, the UN number the identity of the substance.
- If you see an X, do not use water; a code starting with 2 indicates pressurised gas, and a code containing 6 indicates that respiratory protection is required.
- Follow the steps in the driver's instructions in writing and what to do in an accident or leak.
The consignor is responsible for correctly identifying the substance; the carrier ensures that the plates are complete on the vehicle, and for tankers the filler does so as well. A wrong code can lead the fire brigade to choose the wrong extinguishing agent. In dangerous goods transport, comparing the code on the plate with the UN number and class in the documents is one of the simplest and most effective checks that can be done before the vehicle sets off.