Get a Quote
Social Media

How is LCL freight calculated (W/M, CBM)?

Last updated:

Short Answer — LCL Freight Calculation (W/M)

LCL freight is calculated on a W/M (weight or measurement) basis: 1 tonne is treated as equivalent to 1 m³, and whichever is greater, the cargo's tonnes or cubic metres, becomes the chargeable unit, the revenue ton (RT). The RT is multiplied by the line's unit rate; most tariffs apply a 1 RT minimum. Origin and destination CFS, deconsolidation and documentation charges are added to the total cost.

What does the W/M rule mean?

In an LCL shipment, cargo from several shippers shares a container. The consolidator sells both the container's volume and its payload capacity; to combine the two into one unit, it treats 1,000 kg as equal to 1 m³. If your cargo is light and bulky, you pay by cubic metre; if it is heavy and compact, by tonne. “W/M” on the invoice indicates this comparison, and “RT” the result.

In part-load road transport, the same logic works with a different ratio (1 m³ is about 333 kg); for a comparison, see the entry on part-load freight calculation.

How is the calculation done, step by step?

  1. Measure: Each carton, crate or pallet is measured at its outermost points, including the pallet.
  2. Find the volume: Length × width × height (in metres) is calculated for each piece and summed. Most consolidators round the result to two decimal places.
  3. Convert the weight to tonnes: Divide the gross kilograms by 1,000.
  4. Determine the RT: Take the greater of the tonnes and m³ values.
  5. Check the minimum: If the result is below 1 RT, most tariffs charge 1 RT.
  6. Multiply by the unit rate: Freight = RT × the line's rate per RT.
  7. Add local charges: Origin and destination items are also mostly priced per RT.

Worked examples

ShipmentVolumeWeightChargeableDetermined by
A – 3 crates of spare parts4.20 m³2,900 kg (2.9 t)4.20 RTVolume
B – 2 pallets of metal castings1.50 m³3,400 kg (3.4 t)3.40 RTWeight
C – 4 cartons of samples0.60 m³250 kg (0.25 t)1.00 RTMinimum charge

If the rate per RT is F, the ocean freight for shipment A is 4.2 × F. Shipment C has the highest unit cost because it pays 1 RT despite being 0.6 m³; this is why comparing with air freight or courier makes sense for very small loads.

Which charges are paid besides the freight?

  • At origin: CFS handling and container stuffing, terminal handling (THC), bill of lading fee, export customs clearance.
  • Freight-related surcharges: Items such as fuel (BAF) and currency adjustment; details in the entry on BAF, CAF and THC.
  • At destination: Deconsolidation (unloading the container and separating the consignments), CFS storage, delivery order fee, import customs clearance.
  • Special cargo: Surcharges or separate approval are required for cargo where a single piece exceeds a certain weight or length, and for dangerous goods (IMDG).

When destination charges are missing from a quote, they cause a surprise on the first invoice. Ask in writing which items a “port-to-port” rate leaves out. How the container is consolidated and deconsolidated is explained in the entry on LCL consolidation.

Ways to reduce the cost

  • Pack the cargo tightly; cartons overhanging the pallet increase the volume.
  • Avoid unnecessarily tall pallets; a 2.2 m pallet often pays for empty space rather than cargo.
  • Combine small loads going to the same consignee into one shipment so that the minimum charge is paid only once.
  • If the volume approaches 12–15 m³, compare with a 20' FCL rate.
  • If the buyer and the supplier must not see each other, consider the neutral consolidator option.

Because Voltim Global's sea freight service offers both FCL and LCL options, the two calculations can be set side by side for the same cargo.

Frequently Asked Questions

Is the volume rounded when calculating LCL?
Yes, in practice it is. Most consolidators take each piece's dimensions in centimetres, round the total volume to two decimal places and compare the result with the weight. Some tariffs also round the portion above 1 RT up in steps of 0.1 or 0.5 RT. If this rule is not stated in the quote, ask about it, because it can noticeably change the total for small shipments.
When does LCL become more expensive than FCL?
In LCL, freight and most local charges are paid per RT; in FCL they are fixed per container. As the cargo grows, the LCL total rises linearly while FCL stays flat. Although it varies by trade lane and period, the break-even point for a 20' container usually falls in the 12–15 m³ range. For heavy cargo, the container's weight limit must also be taken into account.

Published: 19.11.2026 · Voltim Global