Because fresh nuclear fuel contains low-enriched uranium, it is transported under ADR, IMDG and IAEA rules as Class 7 radioactive and fissile material. The assemblies are placed in packages whose design has been approved for criticality safety; the shipment travels under a state licence, a physical protection plan and escort. As the radiation level is low, heavily shielded casks are not needed.
What sets fresh fuel apart from ordinary equipment?
Fresh fuel consists of assemblies of uranium dioxide pellets that have never been used in a reactor. Its radiation level is low; in the words of the World Nuclear Association, uranium fuel assemblies need no radiation shielding. What makes it special is not so much its radioactivity as the fact that it is fissile: if enough of it comes together in a suitable geometry, a chain reaction can start. The rules therefore focus on preventing criticality and on keeping the material out of the wrong hands.
In terms of quantity, fresh fuel is not as large as one might think. The annual requirement of a 1,000 MWe light water reactor averages 27 tonnes of uranium dioxide and can be carried by 4–5 trucks. Most nuclear power plant equipment, on the other hand, is not radioactive at all; this distinction is explained in the entry is nuclear equipment radioactive.
Which rules apply?
- IAEA transport regulations: The International Atomic Energy Agency's regulations for the safe transport of radioactive material (SSR-6) are the basis of all modal regulations.
- Road and sea: ADR applies on the road and the IMDG Code at sea; both transpose these rules as Class 7. The general workings of the class are covered in ADR Class 7.
- Criticality safety index: Every package containing fissile material has a criticality safety index; the total index that may be accumulated in one vehicle or container is limited.
- Physical protection: The Convention on the Physical Protection of Nuclear Material and national regulations determine the confidentiality, escort and communication arrangements of the shipment (see physical protection and logistics).
- National licence: In Türkiye, the Nuclear Regulatory Authority (Nükleer Düzenleme Kurumu, NDK) issues an import and transport licence for each fuel batch. The licences for the first two fuel batches of Akkuyu Unit 2 were granted on 9 and 18 December 2024.
How is the packaging designed?
The package's job is to maintain the spacing and geometry between assemblies even in accidents that may occur during transport. Criticality is prevented through the package design and the maximum number of packages allowed in one shipment. A typical fresh fuel container has an internal frame holding each assembly separately, shock absorbers, neutron-absorbing material and a sealed lid. The package design is approved by the competent authority and tested against drop, fire and immersion scenarios. Heavily shielded Type B casks are intended mainly for high-activity material such as spent fuel.
Who may carry it, and how does the process work?
- Package design approval is obtained and, where necessary, validated in transit countries as well.
- The fuel manufacturer and the recipient obtain a shipment licence from the national regulator.
- The carrier is assigned with a Class 7-trained driver and a suitable vehicle.
- Security forces provide escort under the physical protection plan; the route and timing are not disclosed in advance.
- The emergency plan and chain of communication are kept active throughout the shipment.
- On site, the packages are inspected and the fuel is placed in a protected store.
| Feature | Fresh fuel | Nuclear power plant equipment | Spent fuel |
|---|---|---|---|
| Radioactivity | Low, fissile | None | Very high |
| Packaging | Approved fissile material package | Commercial crate, preservation | Shielded Type B cask |
| Physical protection | Mandatory | At site security level | Mandatory, strictest level |
Intercontinental transport of fresh fuel is mostly by sea, occasionally by air. The first fuel load for Akkuyu Unit 1 arrived on site in April 2023. The mock-ups used before real fuel during commissioning are explained in the entry on the dummy fuel assembly, and the shipment of the main equipment other than fuel on the nuclear project transport page.
Frequently Asked Questions
Is there a danger if a vehicle carrying fresh fuel has an accident?
By which mode of transport does fresh fuel arrive?
Sources
- World Nuclear Association – Transport of Radioactive Materials
- NDK – Licensing of Akkuyu Nuclear Power Plant
- UNECE – ADR 2025 (European Agreement concerning the International Carriage of Dangerous Goods by Road)