The cost of oversize transport is determined above all by the dimensions and weight of the cargo, because these two values decide the trailer to be used, the number of axles, the permit and escort requirements and the route. Distance and travel speed, road modifications, cranes and handling, waiting times at the port and on site, and insurance are added to these.
Why is the price not set by a single unit?
In standard truck transport, the price is mostly calculated by kilometre and vehicle type. With oversize cargo, however, the same 500 km can be completed in two days or take a week, depending on the width of the load. The cost is the sum of vehicle, permit, route, manpower and time items. Each of these items depends on the technical data of the cargo.
Main cost items
| Factor | How does it affect the cost? |
|---|---|
| Dimensions (width, height, length) | Determine the number of escorts, travel hours and the need for road modifications. |
| Weight and centre of gravity | Select the trailer type and number of axles; affect tractor power and bridge assessment. |
| Equipment type | The difference in hire, set-up and personnel between a lowbed and a modular hydraulic trailer is large. |
| Distance and speed | The convoy moves at low speed and often only at certain hours; the number of days increases. |
| Permit | Fee, preparation and waiting time; a separate document is required for each departure. |
| Escort and police | Vehicle, personnel and overnight accommodation costs. |
| Route modifications | Lifting power lines, removing signs, crossing central reservations, temporary ramps. |
| Cranes and handling | Crane capacity, mobilisation and ground preparation at the loading and unloading points. |
| Waiting | Every day spent at the port, border or site generates vehicle and crew costs. |
How are permit and escort costs incurred?
For a KGM special permit (General Directorate of Highways, Karayolları Genel Müdürlüğü), a fee of TRY 18,813.80 is charged per permit document in 2026. Under Article 128 of the Highway Traffic Regulation, the document is issued separately for each laden departure; transporting the same part in two stages means two documents. In most projects the fee itself is a small item. The real cost arises from the conditions written in the document: escort vehicles, traffic police accompaniment, a requirement to move only by day or only by night.
Why does the route change the price?
The shortest road is often not the cheapest. A low overpass may require a 30 km detour; a narrow junction means removing kerbs and repairing them afterwards. That is why a route survey is carried out before serious quotations. The survey lists bridge, power line, turning radius and ground issues one by one, and the cost of solving each is calculated as a separate item.
What can be done to reduce the cost?
- Provide accurate data: Packed dimensions, weight and centre of gravity. An extra 10 cm of width discovered later can change the permit and the vehicle.
- Dismantle removable parts: When platforms, ladders or railings are shipped separately, the load often drops into a lower category.
- Leave room in the schedule: A trip planned at short notice pushes you towards a more expensive alternative when suitable equipment is unavailable.
- Consider an alternative mode: Over long distances, a sea or Ro-Ro leg shortens the road kilometres.
- Prepare the loading and unloading points: If the ground and access road are not ready, the crane and crew wait idle.
Common mistakes
- Comparing quotations on the total figure alone; one may include escorts and another may not include the crane.
- Not taking empty return and equipment mobilisation into account.
- Not writing into the contract from which point waiting charges start.
How does Voltim Global support this?
In oversize and heavy cargo transport, Voltim Global plans the permit, route and escort items separately. For the Voronezh–Mersin shipment, the KGM special permit was obtained in one day; a shorter permit time directly reduces the number of days the vehicle and crew wait.