Yes. There is no single international permit for oversize cargo; every country on the route requires a separate special permit from its own road authority. In Türkiye, this permit is issued by the General Directorate of Highways (KGM); in Germany, applications are made through the VEMAGS system, and in Russia to the federal and regional road authorities. Dimension thresholds, escort rules and application times vary from country to country.
Why is a single permit not enough?
A road is infrastructure belonging to the state that built it and maintains it. Only that road's authority knows how much load a bridge can carry or at what time a junction can be closed. An oversize permit is therefore a permit for road use, not for the transport as such, and it is valid only within the borders of the issuing country.
European Union Directive 96/53/EC harmonises standard vehicle dimensions in international traffic: 2.55 m width, 4.00 m height, 40 tonnes total weight and so on. Permits for indivisible loads exceeding these limits, however, remain within the competence of the member states. The basic dimensions in Türkiye are largely the same; Article 128 of the Road Traffic Regulation (Karayolları Trafik Yönetmeliği) is based on the same values.
What differs between countries?
| Topic | What differs? | Effect on planning |
|---|---|---|
| Dimension thresholds | From which width and weight an escort or additional assessment is required | The same load passes with a simple permit in one country and with a bridge calculation in another |
| Escort | Private escort vehicle or police; how many vehicles | The escort booking must be ready at the country entry |
| Travel hours | Night travel requirement, weekend and holiday bans | Daily progress varies by country |
| Application route | Online system, local representative or direct application to the road authority | Some countries require a local partner |
| Time and fee | From a few days to a few weeks | The permit that takes longest determines the shipment date |
The thresholds of European countries are described in detail in the entry on oversize load limits in Europe, and the process in Russia in the entry on the negabarit (oversize) load permit in Russia.
How do border crossings create constraints?
Permits cover the road, but the border crossing is a separate bottleneck. Canopies and roofs in the crossing area impose height limits; X-ray scanners, weighbridges and narrow lanes make it hard for wide loads. Some crossings accept oversize vehicles only at certain hours. At crossings on mountain passes, weather conditions are also decisive. The options towards Russia are covered in the entry on road routes from Türkiye to Russia, and the features of the Georgia–Russia crossing in the entry on the Upper Lars border crossing.
How do permit times affect planning?
- The route is surveyed separately for each country: Bridge, overpass and junction data are collected country by country.
- The document set is prepared once, correctly: The load drawing, vehicle combination, plates and axle loads must be identical in all applications.
- Permit dates are chained: The next country's permit must start before the previous country's permit expires. Waiting at the border can use up the permit's validity window.
- If the vehicle changes, the permit is renewed: The permit is tied to the plate; changing the tractor unit because of a breakdown means a new application or a permit amendment in most countries.
- A time buffer is left: Applications that will take long are started before production is finished.
Common mistakes
- Assuming the Turkish permit is also valid in transit countries.
- Confusing the transport permit (CEMT or bilateral transit permit) with the road-use permit.
- Declaring different dimensions for the same load from country to country.
- Planning the escort up to the border without arranging the other side.
How does Voltim Global support you here?
In international road trips, Voltim Global lines up the country permits in a single schedule. In the Voronezh–Mersin shipment, the KGM special permit for the Turkish leg was obtained in 1 day. Planning is carried out together with the oversize and heavy cargo operation.