Get a Quote
Social Media

What are ADR hazard labels and placards?

Last updated:

Short Answer — ADR Hazard Labels

ADR hazard labels are square-on-point (diamond) marks of at least 100 × 100 mm stuck onto packages; they show the hazard of the substance by symbol, background colour and class number. Placards are the larger version of the same design, at least 250 × 250 mm, and are fixed to the outside of the vehicle, container or tank.

What is the difference between a label, a placard and an orange plate?

ADR marks dangerous goods at three levels: the package, the cargo transport unit and the vehicle. Each addresses a different audience. The label informs warehouse staff, while the placard and the orange plate inform the fire brigade responding on the road.

MarkWhere is it applied?Minimum sizeADR section
Hazard labelBox, drum, IBC100 × 100 mm5.2.2
Placard (large label)Container, tank, vehicle250 × 250 mm5.3.1
Orange plateFront and rear of the vehicle, sides of tanks400 × 300 mm (300 × 120 mm on narrow vehicles)5.3.2
Environmentally hazardous substance markPackage and cargo transport unit100 × 100 mm / 250 × 250 mm5.2.1.8 / 5.3.6

The meaning of the numbers on the orange plate is explained separately in the orange plate entry.

How are labels divided by class?

Each label has a model number, which in most cases is the same as the class number. Main examples:

  • 1 – 1.6: Orange background; exploding bomb symbol for 1.1–1.3.
  • 2.1 / 2.2 / 2.3: Flame on a red background, gas cylinder on a green background, skull and crossbones on a white background.
  • 3: Flame on a red background (flammable liquids).
  • 4.1 / 4.2 / 4.3: Red and white vertical stripes; upper half white, lower half red; blue background.
  • 5.1 / 5.2: Flame over a circle on a yellow background; upper half red, lower half yellow.
  • 6.1 / 6.2: Skull and crossbones on a white background; infectious substance symbol.
  • 7A, 7B, 7C, 7E: Radioactive trefoil and fissile material labels.
  • 8: Upper half white, lower half black; corrosion symbol.
  • 9 / 9A: Seven black vertical stripes in the upper half; 9A for lithium batteries.

The scope of the classes is in the ADR dangerous goods classes entry. If a substance has a subsidiary hazard, its label is also affixed next to the primary label.

How is it applied to the package?

  1. First, the UN number is marked on the package in the form "UN 1263".
  2. If the package dimensions allow, the label is affixed to the same surface as the UN mark; for Class 1 and 7 it is placed next to the proper shipping name. The label is not folded and is not covered by tape or another mark.
  3. If several labels are required, they are placed next to each other.
  4. On IBCs with a capacity of more than 450 litres and on large packagings, the label is applied to two opposite sides.
  5. On combination packagings with liquids in their inner packagings, orientation arrows are applied to two opposite vertical sides.

If the package is very small, the label size may be reduced as long as legibility is not impaired.

Where are placards fixed on vehicles and containers?

  • Container, tank-container, MEGC and portable tank: On each of the four sides.
  • Tank vehicle and bulk vehicle: On both sides and at the rear.
  • Vehicle carrying packaged goods: On both sides and at the rear for Class 1 and Class 7 only.

Model 9 is used for the Class 9 placard; 9A is not used as a placard. On empty but uncleaned tanks, the placards remain in place.

Common mistakes

  • Reusing packaging without removing the labels left from the previous shipment.
  • Using a GHS/CLP pictogram instead of an ADR label.
  • Setting off with labels that are sun-faded, torn or whose colour cannot be distinguished.
  • Affixing unnecessary hazard labels to a limited quantity consignment.

The labelling check is one of the first items on the pre-loading checklist in dangerous goods transport.

Frequently Asked Questions

Are hazard labels required for limited quantity (LQ) consignments?
No. For products packed in limited quantities, a black and white diamond-shaped LQ mark is placed on the box. On vehicles with a maximum mass exceeding 12 tonnes carrying more than 8 tonnes of LQ goods, an LQ mark is also displayed at the front and rear of the vehicle. Orange plates and class placards are not required on these vehicles.
Should labels remain on empty, uncleaned packagings?
Yes. An emptied but uncleaned packaging carries the same hazard as a full one because of the residue inside. The labels therefore remain in place until the packaging has been cleaned or rendered non-hazardous. This is also stated in the transport document with the words "EMPTY PACKAGING". Details are in the ADR transport document entry.

Published: 21.11.2026 · Voltim Global